Find the new step by step configuration process of syRotech GPON / EPON ONT device to connect high speed internet as per the FTTH plan as well as voice connection to talk unlimited…
syRotech is one of the prominent Network unit and competent service provider, in this article we will discuss more in depth about the fiber broadband network configuration with the BSNL FTTH service and how important this can be.
syRotech have a wide range and array of products lined up, their fiber and network unit are more aligned as they serve a larger, and in this guide we essentially explains to you how you can use the syRotech GPON/EPON ONT with good configuration.
You will understand more in-depth about the account configuration that you have to make with one of the business units from the syRotech brand by following the below step by step configuration process, Let’s have a look at complete details
| About | Details |
|---|---|
| Company | syRotech Networks Pvt Ltd |
| Description | Subscriber End Equipment |
| Product Name | G/EPON ONT |
| Default IP Address to open Equipment | 192.168.1.1 |
| User ID | admin |
| Default password | Syro@43210$ |
| Product Mode | SY-GPON-1110-WDONT |
| Power Rating | 12V-1000mA |
syRotech ONU Configuration Steps
- Open ONT using IP address 192.168.1.1 in your browser
- Enter syRotech default user id as admin and default password as Syro@43210$ to login to ONT
Internet Configuration
- Hover to Network
- Click Internet Connection and select the following
- Connection Name: 1_Internet_R_VII
- Mode: Route
- IP Protocol Mode: Ipv4
- Select PPPoE
- Enable NAT, VAN
- Enter FTTH Username and Password provided by ISP
- Enter Service Name: BSNL
- Enable Port Binding [Port_1, Port_2, WLAN(SSID1)]
WiFi Configuration
- Hover to Network
- Click WLAN
- WLAN Basic
- Band: 2.4Ghz
- Mode: AP (Your circle)
- SSID: Enter your WiFi Name
- Select WMM, SGI
- WLAN Advanced
- Click Off under Different SSID isolation > Apply Changes
- WLAN Security
- Select SSID Type
- Encryption (WPA2 Mixed)
- Authentication Mode as Personal (pre-shared key)
- Select TKIP under WPA2 Cipher Suite > AES under WPA2 Cipher Suite
- 86400 as Group Key update timer
- Select Passphrase under Pre-shared key format
- Enter password under pre-shared key
- Apply Changes
- WPS Configuration (Optional)
- Enter Self Pin Number > Click Apply Changes
Voice Configuration
- Go to Application
- Click VOIP Configuration
- Select Soft Switch SIP under Server Type
- Enter the values given by your ISP (Primary and Secondary SIP Register and Proxy details)
- Provide your phone number starting with 91 in Account Number and Account Name > Enter password > Click Save/Apply
Syrotech Customer ONT Security Guidelines
- Change the ONT login Username / Password
- Remove the common ports on WAN
- Disable the UPnP configuration
- Change the wifi Default Password
- Set the ONT firewall ON to High
syRotech Security Guidelines for TIP (Telecom Infrastructure Provider)
- Block telnet port in the OLT
- Enable SSH port in the OLT
- Change OLT Username and Password
- OLT Upgrade Process
- Change ONT WiFi Settings From OLT
Every customer may follow the above step by step guide if required to configure syRotech WiFi GPON ONT for BSNL FTTH services to get connected for high speed internet and SIP based voice calling.
I dont have any option in Mode box in WLAN basic settings. How to get this correct? Any of my devices cant connect through Wi-Fi.
I need to select AP over there but there isnt anything there
I am unable to login my router ip address is 192.168.101.1
How can I access Syrotech router remotely? So that I can see station info and block desired device using MAC ID, from accessing my router from other network.
192.168.101..1 KE PASWOORD KYA HE
you need to check the router which your are using
for syrotech it will be
User ID admin
Default password Syro@43210$
Hi, please help me to configure VoIP in syrotech and grandstream wave app to make calls.
Can i check the data usage and bandwidth allocation for each device
Router password is not working.
It’s showing bad password though I am typing right password.
What can I do?
try with stdONUi0i
it is showing bad password even i give default one, what to do
Syro@43210$ this password is not working pls help
I am unable to access Syrotech G/EPON-ONU.
Product Model = SY-GPON-4000-WDAONT
Default IP accessing to web UI = 192.168.101.1
You can reset your device anytime of such problem occurs.
Go to setting internet and sharing centre disable adaptor and then again enable it ,wifi …
password Syro@43210$ not working ,its showing bad password
yes, the same issue I am facing. Please help me and tell me the right password.
I have syrotech router but I don’t able to enter in 192.168.1.1, It says bad password please solve my issue
Need to configure VPN so how to configure bridge mode on this router please guide
the password on the nox Syro@43210$ is not working it shows that bad password, how do i change it
Just unable to configure the phone on my Syrotech ONT “SY-GPON-4020-WDONT” as NAT is showing disabled in the status for voice, Please help as this model is new and even BSNL technician is not able to fix it.
Same issues unable to configure voice
It seems like you were able to login. Can you share the password you used.
I am not able to connect Google chromecast using WIFI, I have syrotech modem, It is giving error giving message turn off ap isolation, I had login using 192.168.1.1 but there i am not able find the AP isolation check box
How to add a new static route ? I want to configure a second switch with an IP address of 192.168.1.2 . I given Ip address as same and subnet mask as 255.255.255.0 . But it says “Destination IP address “192.168.1.2” do not match with subnet mask “255.255.255.0”
How is the dual band syRotech ONU, today BSNL contractor will come to install it, Is there any other good option of ONU+Router which can work in BSNL Fiber net ?
I have reset l don’t know password.
password might be 12345678 or default given on the router box
There cannot be any worse internet service and worse router i have ever seen in my life.
I took a SyroTech Modem from my friend and I’m trying to get new connection, Myself with this, But 192.168.1.1 is not working.can some one help on this
ip petandi lanlo 192.168.1.5 sub 255.255.255.0 gate way 192.168.1.1
Pl inform regards to WPS configuration for setup of wireless printer.
The instructions given here are unclear.
Regards.
I have installed dual band syrotech router with BSNL fiber broadband band voice landline, However the voice is not working and the vendor says that, what is the configuration to set up voice? please suggest
pl tell me the default password, I tried Syro@43210$, but no use
Router doesn’t login by username and password plz help
Contact me 7275304216
Yeah, I also tried Syro@43210$, But it’s no use. And I can’t able to contact can u say it here?
I m not able to connect my net to my sony bravia, it says the wifi didn’t accenpt the connection, What to do ?
i want upgrade my firmware version for my router.
I have a BSNL franchise and my code name is NHAGGNPREETI and an ONU a few days ago, I have configured but it is disconnecting in case please suggest me or help me resolve this matter as soon as possible so that I can install it at the customer’s home.
Some web sites not opening.
Password shown on Box is not working, I am trying to approach provider but they fail to do so.
Company must care about customer staisfaction.
How to change our password.
I’m done all configuration and network status show connected but internet is not working.
i had connected to my wifi but i am unable to change my password every ime i tried it says invalid or any other thing.
The same problem, done reset 3-4 times still not working, please, someone, help
Hey, Are you able to reset your password, I am also facing the same issue, If you are able to do, Please Help.
I want to share my internet to another room through LAN cable, what settings to be configure for both router.
I am not able to login, please provide me correct Username and Password.
Open a web browser and access http://192.168.1.1. After a few seconds, you will get a Web login page asking for username and password. Use “admin” as username and “stdONU101” for the password.
how to enable proxy server in my wifi router, plz help me
What is the default WPS PIN.
default pin for syrotech is Syro@43210$
It’s not working, fully error
username must input – adminisp
password – Syro@43210$
Hi, What if my default modem password is not working ? whom to contact for my modem passwords?
just reset your router by pressing reset button for 4-5 seconds, and try
What will be the password after resetting it?
MAC7CA96B1AXXXX.
WANMAC.7CA96B1AAXXXD.
PONS/N.GPON00iAXXXX8.
S/N.Sy2103XXX38 Password తెల్పగలరు.
What will be the password after resetting it?
default username- adminisp
default password- Syro@43210$ (case sensitive)