Login to 192.168.1.1 for configuration of Netlink ONU for BSNL Fiber to Home service to access voice and internet facilities, Add security and enable WiFi in the configuration in Netlink Optical network unit (ONU) to connect the world with high wireless internet…
Let’s have a look at the detailed step by step modem configuration process of Netlink WiFi ONT / ONU (Optical Network Unit) to enable voice and internet facilities, connected GPON BSNL OLT (Optical Line Terminal) providing upstream and downstream data speed at same level accordingly as per the subscribed BSNL broadband plan.
Follow the steps to configure Netlink ONU for any ISP providing Fiber net connection using OLT, Here we are providing BSNL FTTH network configuration in GPON optical modem
- Login to Netlink ONU in any browser with url 192.168.1.1
- Enter username and password
username is admin and default password is stdONU101
- Go to Management > Device Management > Restore default > Restore Factory default
- Click Network > Internet > Delete
- Check Status > Wan Connection info >
WAN info status enabled means, you are ready to browse the internet.
- Click Network > Internet (Add New Connection for Internet)
Mode : Route,
IP Protocol Mode : Ipv4, and select PPPoE,
Enable NAT : Select radio button
Enable Vlan : Enable by select,
Vlan id : Submit the ID provided by BSNL,
Username : Enter BSNL allocated FTTH username followed by @ftth.bsnl.in
Password : password (default)
Service Name : BSNL or which you want,
IP Address: Provide your BSNL allocated IP address,
Port binding : Enable Port 1, Port2 and WLAN (SSID1) by selecting in each box
Click Save
- Again Click Network > Internet for Voice Configuration
Connection name : Add new wan connection,
Mode : Route,
IP Protocol Mode : Ipv4, and select Static,
Enable Vlan : Enable by select,
Vlan id : 1830,
Provide your BSNL allocated IP address, Subnet Mask, Default Gateway, DNS1, DNS2, provided by BSNL
Service Mode : Voice
Click Save
- Click Application
Enable all the services(ftp, h323, rtsp,ipsec, sip, pptp) in ALG configuration
Save/Apply - Click Application > VOIP
SIP registered address : xx.ftthvoip.bsnl.in (first 5 to be filled as xx.ftth.bsnlvoip.bsnl.in)
Select and Enable Outbound Proxy,
Enable Line 1 and enter Account name, Account number, Account password with allotted BSNL FTTH phone number starting with 91 starting by removing 0
Click Save/Apply - Click Status
WAN Information info for both Voice and Internet facilities are enabled or not.
If having any doubts on this configuration process for Netlink ONU, please do comment and get solved the queries/errors.
Aman deep says
Hi
I am getting sufficient downloading speed as per the plan but the uploading speed is really abysmal, Can you please tell me what may be the cause?
Rajesh says
How to setup NAT type to open/moderate ??
Lucifer says
I want a solution for this.
PAVAN KALE says
HOW DO I CHANGE THE WIFI PASSWORD,
Darshan says
Hi Pavan,
Once you login to the page go to “Network” >> WLAN >> WLAN Security.
on this page you will find “Pre-Shared Key” which you can update with your desired password and Apply the changes.
Regards
Darshan
raj nishad says
SIP address for Maharashtra BSNL
Gokul says
Ip address for bsnl ftth voice?
BSNL TeleServices says
FTTH IP address should be differed for circle/area wise, so please contact nearest BSNL JTO/SDE
Lovegin Francis says
Is it possible to configure voice over android phone like jio is being provided.